d a t a s h e e t : c l d - c t 1 8 6 . 0 0 0 cree ? smd led model # lm2-thr-f-n data sheet 60-degree, 3.2 x 2.7 mm, power smd led in red color with water-transparent lens applications traffc lights backlighting (such as lcds, switches, keys, displays, illuminated advertising) interior and exterior automotive lighting (such as dashboards, backup and brake lights) substitution for micro incandescent lamps marker lights (such as steps and exits) signal and symbol luminaires absolute maximum ratings (t a = 25c) items symbol absolute maximum rating unit forward current i f 70 ma peak forward current note 1 i fp 200 ma reverse voltage v r 5 v power dissipation p d 225 mw operation temperature t opr -40 ~ +100 c storage temperature t stg -40 ~ +100 c junction temperature t j 110 c junction/ambient note 2 r thja 300 c/w junction/solder point r thjs 150 c/w notes: pulse width 0.1 msec, duty 1/10. rth test condition: mounted on pcb fr4 (pad size 16 mm 2 ) typical electrical & optical characteristics (t a = 25c ) characteristics symbol condition unit minimum typical maximum forward voltage v f i f = 50 ma v 2.5 3.2 reverse current i r v r = 5 v a 10 luminous flux v i f = 50 ma mlm 2550 luminous intensity i v i f = 50 ma mcd 1400 2200 dominant wavelength d i f = 50 ma nm 620 628 635 50% power angle 2? i f = 50 ma deg 60 ? ? ? ? ? ? 1. 2. subject to change without notice. www.cree.com/ledlamps
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 2 cld-ct86.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps standard bins for lm2-thr-f-n (i f = 50 ma) lamps are sorted to luminous intensity (i v ) and dominant wavelength ( d ) bins shown. orders for LM2-THR1-F1-N1 may be flled with any or all bins contained as below. all luminous intensity (i v ) and dominant wavelength ( d ) values shown and specifed are at i f = 50 ma. y2 or above y1 x2 x1 w2 important notes: all ranks will be included per delivery; rank ratio will be based on the dice distribution. tolerance of measurement of luminous intensity is 10%. tolerance of measurement of the dominant wavelength is 1 nm. tolerance of measurement of v f is 0.05 v. packaging methods are available for selection; please refer to the cree led lamp packaging standard docu - ment. please refer to the cree led lamp reliability test standards document for reliability test conditions. please refer to the cree led lamp soldering & handling document for information about how to use this led product safely. 1. 2. 3. 4. 5. 6. 7. 635 nm 620 nm dominant wavelength ( d ) luminous intensity (i v ) 3550 mcd 2800 mcd 2240 mcd 1800 mcd 1400 mcd
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cld-ct86.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps graphs 4/4 format #: cotco-d-074 rev.4 document no. spe/ LM2-THR1-F1-N1 rev. no. 02 g g r r a a p p h h s s vr(v) -30.0 reverse voltage. fig.2 reverse current vs. -40.0 -50.0 ir(ua) -60 -50 -40 -30 0.0 -20.0 -10.0 -20 -10 fig.6 spatial distrcbution. 40 0.4 70 1.0 100 80 90 0.4 0.6 0.8 20 0 0 0.2 60 50 40 0.8 0.6 10 30 20 1.0 0 100 80 60 110 50% power angle : 100.0 if(ma) 20.0 0.0 0.0 60.0 40.0 80.0 vf(v) 20.0 2.2 fig.1 forward current vs. forward voltage. 2.0 0.0 2.62.4 2.8 3.0 80.0 60.0 40.0 100.0 if (ma) fig.4 relative luminous intensity vs. wavelength. 100% domi wl= 628nm i (relative luminous intensity) 50% 500 0% 400 25% 600 75% wl(nm)wl(nm) 800 700 half power wl=23nm 80 temperature. derating based on tjmax=110 c fig.5 maximum forward dc current vs 0 0 20 40 40 rth j-a=300 c/w 20 60 if(ma) 80 60 100 rth j-s=150 c/w t ( c) 100 fig.3 relative luminous intensity vs. forward current. 0.5 1.0 1.5 2.0 2.5 items signatures date revision history prepared by wangfj 2007-03-16 rev.no date change description checked by xiejh 2007-03-16 02 2007-03-16 cancel cover page description:60 degree approved by davidliu 2007-03-16 fcn# fcn20070080 data is subject to change without prior notice; pleas e refer to cotco website for the latest version. copyright@2002 cotco international ltd.
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. cld-ct86.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps mechanical dimensions all dimensions are in mm. notes rohs compliance the levels of environmentally sensitive, persistent biologically toxic (pbt), persistent organic pollutants (pop), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with eu direc - tive 2002/95/ec on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs), as amended through april 21, 2006. vision advisory claim users should be cautioned not to stare at the light of this led product. the bright light can damage the eye. 2/4 format #: cotco-d-074 rev.4 document no. spe/ LM2-THR1-F1-N1 rev. no. 02 a a p p p p l l i i c c a a t t i i o o n n s s : : d d i i m m e e n n s s i i o o n n d d r r a a w w i i n n g g - traffic light - backlighting(lcd,switches,keys,displays,illuminated advertisi ng) - interior and exterior automo tive lighting(e.g. dashboard backli g ht and brake li g hts ) - substitution of micro incandescent lamps - marker lights(e.g. steps,exit ways,etc.) - signal and symbol luminaire a a b b s s o o l l u u t t e e m m a a x x i i m m u u m m r r a a t t i i n n g g s s a a t t t t a a = = 2 2 5 5 c items symbol absolute maximum rating unit forward current i f 70 ma peak forward current* i fp 200 ma reverse voltage v r 5 v power dissipation p d 225 mw operation temperature t opr -40 ~ + 100 c storage temperature t stg -40 ~ + 100 c junction temperature tj +110 c junction/ambient ** r th ja 300 c /w junction/solder point r th js 150 c /w *pulse width <=0.1msec duty <=1/10 ** rth test condition: mounted on pc board fr 4(pad size>=16mm 2 ) t t y y p p i i c c a a l l e e l l e e c c t t r r i i c c a a l l & & o o p p t t i i c c a a l l c c h h a a r r a a c c t t e e r r i i s s t t i i c c s s ( ( t t a a = = 2 2 5 5 c ) ) items symbol condition min. typ. max. unit forward voltage v f i f =50ma --- 2.5 3.2 v reverse current i r v r = 5v --- --- 10 p a luminous flux - v i f = 50ma --- 2550 --- mlm luminous intensity i v i f =50ma 1400 2200 --- mcd dominant wavelength o d i f =50ma 620 628 635 nm 50% power angle 2 t ? i f = 50ma --- 60 --- deg
copyright ? 2007 cree, inc. all rights reserved. the information in this document is subject to change without notice. cree and the cree logo are registered trademarks of cree, inc. 5 cld-ct86.000 cree, inc. 4600 silicon drive durham, nc 27703 usa tel: +1.919.313.5300 fax: +1.919.313.5778 www.cree.com/ledlamps kit number system cree led lamps are tested and sorted into performance bins. a bin is specifed b y ranges of color, forward voltage, and brightness. sorted leds are packaged for shipping in various convenient options. please refer to the cree led lamp packaging standard document for more information about shipping and packaging options. cree leds are sold by order codes in combinations of bins called kits. order codes are confgured in the following manner: * contact your cree sales representative for ordering information. standard available kits* kit number description LM2-THR1-F1-N1-00001 smd 60 high red 628nm, full rank, tape & reel * please contact your cree representative about the availability of non-standard kits. aaaaaaaaa-aaa-aa- x x x x x wd/color 1: full-color distribution 2~9, a~z . . . : special request * i v 0: full luminous intensity distribution 1~9, a~z . . . : special request * v f 0: full forward v oltage distribution 1~9, a~z . . . : special request * pa cking type 0: standard = tape pack 1~9, a~z . . . : special request * standard/custom 0: standard c: custom product p/n
|
